Maintenance and Adjustment
Cleaning
• Dry and lube the drive chain to prevent it from rusting.
----------------------------------------------- Notice -----------------------------------------------
• Immediately wash your bike after riding near the sea road or getting wet with sea-salt water.
Do not use the warm water, it increases the corrosive action of the salt.
• After a ride in the rain, if condensation got in your headlight lens, clean and dry your bike.
Run the engine and turn the headlight on to dry the moist.
Paint Finished Parts
After done wash and dry, wax and polish all the painted surface plus the metal and plastic parts. This
should be done once in every three months. Avoid using paint removers that will impair the wax coatings.
35
To Next Page
Loading...
