18
Side xing strip ADVENTURE SL
Place the second and fourth eyelet of the
seat board strap both sides over the bolts
of the xing strip - with the ADVENTURE
SL onto the existing eyelets.
Firmly fasten the xing frame unit by me-
ans of the knurled nuts.
Remove the 4 knurled nuts on the upper
side of the top panel.
Now position the bar onto the four bolts
and attach the the knurled nuts, but not
yet tight. - Both sheet cleats must point
towards the stern.
Placing the fully assembled frame
unit into the inated boat is impossible.
To Next Page
Loading...
