Grabo Pro Lifter 20 - Safety; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety

13
GRABO PRO-LIFTER 20 | Operator’s manual
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings,

provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, re and/or serious personal
injury.
Save all warnings and instructions for future
reference.
The term ”power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
 
a) Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
b) Do not operate power tools in an
explosive atmosphere, such as in the

dust. Power tools create sparks which may
ignite dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
 
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
 
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual

Use of a RCD reduces the risk of electric
shock.
TOOL ELEMENTS ➊ ⓭
A. Battery
B. Red vacuum release button
 Green motor power button
D. Power ON/OFF switch
E. Digital display
F. Measurement unit selector
G. Run status indicator
H. Attachment rings (4x)
I. Rubber foam seal
J. Air lter pad
K. Air lter lock ring
L. Pressure in bar
M. Pressure in psi
N. Weight inkg
O. Weight inlbs
P. Value of pressure or weight
Q. Battery bar indicator