28
Mondo Elite User Guide
Radio Settings
To Cancel an Alarm:
An upcoming alarm can be cancelled so that it does not sound. If the cancelled alarm has
been configured as a repeating alarm, it will be reset to sound at the following scheduled
time.
1. Press and hold the Home Button when in Standby Mode for 2 seconds.
The alarm icon will be removed from the display screen temporarily until after the scheduled
time of the alarm has passed. This function only cancels the upcoming alarm, it does not
disable an alarm series.
To Enable Alarm Output:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Alarm Clock and Time Options and press the Tune Knob
to select.
3. Turn the Tune Knob to highlight Alarm Output and press the Tune Knob to select.
4. Press the Tune Knob to enable Alarm Output through both the Internal Speaker and
Headphone (when the box has a checkmark in it), or disable (when the box does not
have a checkmark in it).
To Enable Alarm Fade-In:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Alarm Clock and Time Options and press the Tune Knob
to select.
3. Turn the Tune Knob and highlight Alarm Fade-In and press the Tune Knob to select.
4. Press the Tune Knob to enable Alarm Fade-In (when the box has a checkmark in it), or
disable (when the box does not have a checkmark in it).
5. Turn the Tune Knob to highlight Fade-In Time and press the Tune Knob to select.
6. Turn the Tune Knob to adjust the chosen Fade-In Time (from 10 seconds to 60 seconds)
and press the Tune Knob to select.
To Enable Alarm Auto O:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Alarm Clock and Time Options and press the Tune Knob
to select.
3. Turn the Tune Knob and highlight Alarm Auto Off Enabled and press the Tune Knob
to select.
4. Press the Tune Knob to enable Alarm Auto Off (when the box has a checkmark in it), or
disable (when the box does not have a checkmark in it).
To Next Page
Loading...
Need help?
General
