33
Mondo Elite User Guide
Radio Info / Change Radio Name
The Info option displays information about the Mondo Elite serial number and software version.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Info and press the Tune Knob to select. The
information will be displayed.
You can change the name of your radio by selecting Radio Info then highlight and select
Device Name. The new name will now show up in Chromecast-enabled apps, used for
Google Assistant, and broadcast via Bluetooth.
Factory Reset
The Factory Reset option restores the Mondo Elite to the factory settings. It will erase all the
stored network settings, SiriusXM streaming username and password, presets, alarm clock
settings, and set all other options back to the factory settings.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Factory reset and press the Tune Knob to select.
3. Confirm that you really want to proceed with the factory reset. Confirm factory reset
will be highlighted. Press the Tune Knob to proceed with the factory reset, or press the
BACK Button to abort the factory reset.
4. The screen will display “Restoring factory defaults”, restart the Mondo Elite when
complete and display “Please press the POWER button”.
NOTE: You will have to connect the Mondo Elite to a network (see “Connect to a Wireless Network”).
Display Settings
There are three dierent brightness backlight settings, and each type of backlighting can be
set to a brightness from 0 to 20. In addition, each of the backlight settings can be set for two
times of the day. This allows you to have two separate groups of settings, one for the daytime
and one for the nighttime. Select the first option and set the time of day for that option, then
you will be able to set the active, inactive, and standby settings for that time frame. Repeat
the settings for your nighttime mode.
Active: This setting controls the brightness of the display screen when the Mondo
Elite is On, and you are interacting with the Mondo Elite by pressing buttons, etc.
After 30 seconds of inactivity, the display changes to the inactive setting.
Inactive: This setting controls the brightness of the display screen when the Mondo
Elite is On, but you have not interacted with the Mondo Elite by pressing buttons, etc.,
for 30 seconds. You might use this setting to set the brightness when in a darkened
room as you are falling asleep while listening to the Mondo Elite.
Standby: This setting controls the brightness of the display screen when the Mondo
Elite is in Standby Mode.
Advanced Features
To Next Page
Loading...
Need help?
General
