34
Mondo Elite User Guide
Advanced Features
To Set the Display Brightness:
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Display Settings and press the Tune Knob to select.
3. Turn the Tune Knob to highlight Display Brightness and press the Tune Knob to select.
4. Turn the Tune Knob and highlight Active, Inactive, or Standby and press the Tune Knob
to select.
5. Turn the Tune Knob to the desired setting, 0 to 20 and press the Tune Knob to select
your setting.
Optionally - When the radio is in Standby Mode, you can rotate the Tune Knob to temporarily
change the standby backlight brightness. This is perfect to make the display 100% dark while
sleeping, or brighter to see the clock.
To Set the Default Inactive Screen:
You can select either the Now Playing screen or large Time and Date Screen to be displayed
when the music is playing.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Display Settings and press the Tune Knob to select.
3. Turn the Tune Knob to highlight Default Inactive Screen and press the Tune Knob
to select.
4. Turn the Tune Knob to highlight either Now Playing Screen or Large Time and Date
Screen. Press the Tune Knob to select.
Inactive Display Time Delay:
Allows the ability to change the duration of time that the radio will take to go from your
active backlight setting to the inactive setting.
1. Press the Home Button and turn the Tune Knob to highlight Radio Settings. Press the
Tune Knob to select.
2. Turn the Tune Knob to highlight Display Settings and press the Tune Knob to select.
3. Turn the Tune Knob to highlight Inactive Display Time Delay and press the Tune Knob
to select.
4. Turn the Tune Knob to highlight Playback or No playback and press the Tune Knob
to select.
5. Turn the Tune Knob to adjust the chosen time delay and press the Tune Knob to select.
To Next Page
Loading...
Need help?
General
