Graco 246831 User Manual

309577T
EN
Instructions
Displacement Pump
For use with Reactor
®
air and electric proportioners. For professional use only.
3500 psi (24.5 MPa, 245 bar) Maximum Working Pressure
See page 2 for model information.
Important Safety Instructions
Read all warnings and instructions in
this manual before using the equipment.
Save these instructions.
TI2663
TI3733

Graco 246831 Specifications

General

Brand	Graco
Model	246831
Category	Water Pump
Language	English

Summary

Displacement Pump Introduction and Safety

Important Safety Instructions

General safety instructions for equipment operation.

Critical Warnings and Hazard Identification

Skin Injection Hazard

Details risks of high-pressure fluid injection and necessary precautions.

Fire and Explosion Hazard

Covers risks of flammable fumes and static sparking.

Equipment Misuse and Moving Parts Hazards

Dangers from improper operation, modification, and moving components.

Burn Hazard

Toxic Fluid or Fumes Hazard

Covers risks from hazardous fluids/fumes, requiring PPE.

Personal Protective Equipment (PPE) Requirements

Specifies required PPE for safe operation and maintenance.

Isocyanate Handling and Material Management

Isocyanate Conditions and Hazards

Discusses hazards, precautions, and ventilation for isocyanates.

Component Separation and Moisture Sensitivity

Pump Repair and Maintenance Procedures

Pressure Relief Procedure

Step-by-step guide to safely relieve pressure before servicing.

Pump Disassembly, Reassembly, and Reconnection

Component A (ISO) Pump Cutaway Views

Component B (Resin) Pump Cutaway Views

Disassemble the Pump

Reassemble the Pump

Reconnect Pump Assemblies (B and A)