Graco 255200 User Manual

312865H
ENG
INSTRUCTIONS
SDM5 & SDM15 (Manual);
SDP5 & SDP15 (Preset)
Meters
For metered dispense of oils and 50:50 antifreeze/water mix fluids. For professional use
only.
Not for use in explosive atmospheres.
Maximum Working Pressure: 1500 psi (10 MPa, 103 bar)
Maximum Working Pressure (50:50 antifreeze/water mix): 900 psi (6.2 MPa, 62 bar)
Maximum Flow Rate:14 gpm (53 lpm)
List of Models page 2
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
NOTICE
This dispense valve is designed to dispense
petroleum-based lubricants and antifreeze only.
Do not dispense windshield washer solvent with
this dispense valve.
ti11821
Preset Meter shown
US Patent No: D594,490S
India Patent No: 219652
Korea Patent No: 30-555779
Taiwan Patent No: D130836

Graco 255200 Specifications

General

Brand	Graco
Model	255200
Category	Measuring Instruments
Language	English

Summary

Product Introduction and Safety

Important Safety Instructions

Read all warnings and instructions before use. Save these instructions.

Hazard Warnings

Covers skin injection, misuse, battery, fire, and explosion hazards.

Installation and Meter Setup

Installation Procedures

Guide to typical installations, mounting brackets, and initial setup.

Preparation and Component Installation

Steps for pressure relief, grounding, flushing, and installing meter/extension.

Setup Screens and Configuration

Overview of setup modes, including units, calibration, and presets.

Operation, Troubleshooting, and Service

Dispensing Modes and Operation

Access home screen, manual/preset dispense, and view totals.

Troubleshooting Common Issues

Table of issues and their fixes, e.g., display, flow, leaks.

Service Procedures

Covers battery replacement and trip rod repair.

Technical Data and Parts

Parts Lists and Kits

Parts for meters, kits for nozzles, extensions, and thermal relief.

Technical Data and Warranty

Specifications including flow range, pressure, dimensions, and Graco warranty.