To Next PageTo Next Page
Need help?Do you have a question about the Graco 255348 and is the answer not in the manual?
General| Model | 255348 |
|---|---|
| Category | Measuring Instruments |
| Power Source | Electric |
| Maximum Pressure | 3000 PSI |
| Hose Length | 25 ft |
| Type | Paint Sprayer |
Provides essential safety warnings and instructions for manual reading.
Lists manual dispense electronic meters for the SDM5 model.
Lists manual dispense electronic meters for the SDM15 model.
Lists preset dispense electronic meters for the SDP5 model.
Details risks associated with high-pressure fluid injection and necessary precautions.
Outlines dangers of improper use, alteration, or use with incompatible fluids.
Covers hazards related to battery leakage, explosion, or burns.
Provides a visual guide for typical meter installations.
Describes brackets for resting the dispense valve on a console or drum.
Details steps to manually relieve pressure from the system to prevent injury.
Explains the importance and methods of grounding equipment for safety.
Guides through steps before and during meter installation, including flushing.
Step-by-step instructions for connecting the meter to the hose.
Instructions for attaching the extension tube to the meter housing.
Explains how to navigate menus and understand different operating modes.
Describes display features, contrast, sleep modes, and trigger locking.
Details the components of the Main Setup Screen, including icons and selections.
Describes how to select and confirm various setup screens available to the user.
Explains how to set units of measurement and manual dispense limits.
Step-by-step guide for adjusting the maximum quantity in Manual Mode.
Provides calibration numbers for different fluids based on volume.
Instructions for manually adjusting the calibration factor for Preset Meters.
Method for selecting a calibration factor from the provided table.
Detailed steps for performing a manual calibration using a graduated cylinder.
Guide for setting up to three default preset dispense quantities.
Describes banner field and steps to create a custom information banner.
Explains language selection controls and steps for choosing a language.
Details the elements on the Home Screen, including icons and operational choices.
Instructions for dispensing fluids using the manual mode.
Steps to reset the dispensed amount counter to zero.
Explains how to select and view preset dispense quantities.
Instructions for accessing the screen showing cumulative dispense totals.
Steps to reset the resettable total counter to zero.
Addresses issues like display not activating or being unreadable.
Troubleshooting steps for issues with fluid flow rate or blockage.
Explains how to calibrate for accuracy and addresses leak sources.
Addresses trigger reset issues and leaks at nozzle or swivel.
Solutions for when the unit fails to stop dispensing at the preset amount.
Lists thermal relief kits with their respective pressure ratings.
Provides contact details and website for Graco product support.
