Do you have a question about the Graco Booster Seat and is the answer not in the manual?
Type | Booster Seat |
---|---|
Weight Capacity | 40-100 lbs |
Installation Method | Vehicle Seat Belt |
Adjustable Backrest | Yes |
Cup Holders | Yes |
Maximum Height | 57 inches |
Material | Fabric |
Compliance | Meets or exceeds US safety standards |
Crucial warnings about booster seat safety, proper use, and risks of injury or death.
Advises against locations with airbags and recommends rear seating positions.
Warns against leaving the child unattended and the booster seat unsecured.
Discourages modifying the seat or using it with damaged parts or unsafe belts.
Step-by-step instructions on how to attach the armrests to the base and adjust their height.
Specifies the mandatory weight, height, and belt positioning requirements for the child.
Advises on safer rear seating positions and avoiding unsafe ones like those with only lap belts.
Warns that not all seat belt systems are safe and specifies compatible vehicle types.
Details that only a lap/shoulder belt system is safe for use with this booster seat.
Prohibits the use of lap-only belts with the booster seat.
Warns against using passive restraint systems, including those mounted on the door or with motorized shoulder belts.
Emphasizes using the vehicle's lap and shoulder belt system correctly.
Explicitly states not to use a lap-only belt across the child's front.
Instructs that vehicle belts must lie flat, not be twisted, and avoid the child's arm.
Details that the belt must go under armrests and be low on hips, not over armrests.
Ensures the vehicle headrest does not interfere with the booster seat's head support.
Requires the back of the booster seat to fit tightly against the vehicle seat back.
Instructs to place the booster seat firmly against the vehicle seat with a lap/shoulder belt.
Details the correct way to route the shoulder belt through the guide and tighten it.
Specifies that the lap belt must pass under armrests and be low on hips, without twisting.