15
306–646
PARTS
LIST – SEVERE–DUTY PUMPS
Model 222–539, Series A
20:1 Ratio King Pump
with
Standard Air Motor
and Severe–Duty Displacement Pump
Includes items 1–66
Model 223–991, Series A
20:1 Ratio King Pump
with
Quiet Air Motor
and Severe–Duty Displacement Pump
Includes items 1–66
Model 222–526, Series A
10:1
Ratio Bulldog
Pump
with
Standard Air Motor
and
Severe–Duty Displacement Pump
Includes items 1–66
Model 223–984, Series A
10:1 Ratio Bulldog Pump
with
Quiet Air Motor
and Severe–Duty Displacement Pump
Includes items 1–66
REF
NO. PART NO. DESCRIPTION QTY
REF
NO. PART NO. DESCRIPTION QTY
1 207–647 KING, STANDARD AIR MOTOR,
Model 222–539 only
see 306–968 for parts
1
220–106 KING, QUIET AIR MOTOR,
Model 223–991 only
see 307–741 for parts
1
208–356 BULLDOG, STANDARD AIR MOTOR
Model 222–526 only
See 307–049 for parts
1
215–255 BULLDOG, QUIET AIR MOTOR
Model 223–984 only
See 307–304 for parts
1
2 222–638 DISPLACEMENT PUMP ASSEMBLY
Series B
Includes items 3–38, 56–66
1
3 205–161 .HOUSING, intake valve seal
Includes item 30
1
4 206–256 .VAL
VE, bleeder
1
6 100–155 .NUT
, hex, jam; 5/8–18
1
7 101–354
.PIN, roll; 0.188” (4.8 mm) dia;
1.125” (28.6 mm) long
1
8 102–420 .BOLT
, hex hd cap; 5/8–1
1 x 12”
4
11 158–440 .NUT
, packing, intake valve
1
21 186–058** .PACKING NUT/WET–CUP 1
26 181–896 .HOUSING, outlet 1
27 162–898* .GASKET
; copper
3
28 162–900 .HOUSING, intake valve 1
29 162–901 .STOP
, intake valve
1
30 162–902** .SEAT
, intake valve (part of item 3)
1
31 162–903 .GUIDE, valve plate 1
34 165–888 .PLATE, valve 1
35 181–897* .BEARING, piston 2
36 165–890 .PLATE, valve 1
37 172–199 .PIST
ON, priming
1
38 181–893 .PISTON, cylinder 1
41 100–103**
PIN, cotter; 0.125” (3.2 mm) dia. x
1.5” (38 mm) long
1
42 100–104**
PIN, cotter; 0.125” (3.2 mm) dia. x
1.75” (45 mm) long
1
44 101–712 NUT
, lock; 5/8–1
1; w/nylon insert
3
45 101–936 NUT
, hex, jam; 3/4”
1
47 158–674**
O–RING; nitrile rubber
1
49 168–211 COUPLING, connecting rod
Models 222–539 and 223–991 only
1
161–543 COUPLING, connecting rod
Models 222–526 and 223–984 only
1
50 168–210 NUT
, shouldered
Models 222–539 and 223–991 only
1
161–544 NUT
, shouldered
Models 222–526 and 223–984 only
1
52 168–824
ROD, tie; 13–7/8” (352.4 mm) long,
shoulder to shoulder
3
53 168–253
ROD, connecting; 9–5/16” (236.5 mm)
Models 222–539 and 223–991 only
1
164–443
ROD, connecting; 9–3/8” (238.1 mm)
Models 222–526 and 223–984 only
1
56 108–543* PACKING, u–cup; UHMWPE 1
58 172–477*** T
AG, warning (not shown)
1
59 186–063 CYLINDER, pump 1
60 186–095
ROD, displacement
1
61 167–490 ADAPTER 1
62 167–476
ROD, priming
1
64 223–369* GLAND/PACKING ST
ACK, throat
1
65 223–368* GLAND/PACKING STACK,
intake valve
1
66 110–769
SEAL, wiper; polyurethane
1
*Included
in repair kit 220–861.
**Recommended
“tool box” spare parts. Keep on hand
to
reduce
down time.
***Extra warning labels and tags are available free.
306
and 307 numbers in descriptions refer to separate in
-
struction
manuals, supplied.
Displacement Pump Repair Kit 220–861
Must be purchased separately
Includes:
Ref No.
Qty
27 3
35 2
56 1
64 1
65 1
NOTE: O–rings 108–832, 108–833, and 104–445 in-
cluded
in the kit are not used with these models.
HOW T
O ORDER P
ARTS
1 To be sure you receive the correct replacement parts, kits or
accessories, always give all of the information requested in the
chart
below
.
2.
Check
the parts list
to identify the correct part number; do not use
the
ref. no. when ordering.
3.
Order all parts from your nearest Graco distributor
.
6 digit
Part Number
Qty
Part Description
To Next Page
Loading...
