Do you have a question about the Graco Bulldog and is the answer not in the manual?
Brand | Graco |
---|---|
Model | Bulldog |
Category | Water Pump |
Language | English |
Details on available pump models, ratios, and pressure specifications.
Explanation of warning and caution symbols used in the manual.
Procedure for grounding the pump system to prevent fire and explosion hazards.
Guidance on positioning the ram and securing the base for safe operation.
Description of an optional kit to keep the wiper plate clean.
Overview of essential system components and recommended accessories.
Details on air supply components, regulators, manifold, and filters.
Installation of fluid drain valve, dispensing gun, and swivel.
Specifications for proper air and fluid hoses, including conductivity and guards.
Step-by-step guide to safely relieve system pressure before servicing.
Instructions for initial setup, raising the ram, and positioning the fluid pail.
Procedure for starting the pump and adjusting air pressure for the ram.
Steps for safely replacing an empty fluid pail with a full one.
Procedure for safely shutting down the pump and relieving pressure.
Details for the 25:1 Ratio Bulldog Pump with standard air motor.
Details for the 25:1 Ratio Severe-Duty Bulldog Pump with standard air motor.
Details for the 25:1 Ratio Severe-Duty Bulldog Pump with quiet air motor.
Contact details and information for ordering Graco products and support.