EasyManua.ls Logo

Graco Contractor User Manual

Graco Contractor
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
II 2 G EX h IIA T6 GB
311861R
EN
Instructions, Parts
Contractor
®
and FTx
®
Spray Guns
For the application of architectural paints and coatings. For professional use only.
3600 psi (24.8 MPa, 248 bar) Maximum Working Pressure
See page 3 for additional model information.
Important Safety Instructions
Read all warnings and instructions in this manual. Refer to your sprayer instruction
manual for Pressure Relief, priming and spray instructions. Save these instructions.
Important Medical Information
Read the medical alert card provided with the gun. It contains injection injury
treatment information for a doctor. Keep it with you when operating the equipment.
Contractor Gun
FTx Gun
Question and Answer IconNeed help?

Do you have a question about the Graco Contractor and is the answer not in the manual?

Graco Contractor Specifications

General IconGeneral
BrandGraco
ModelContractor
CategoryPaint Sprayer
LanguageEnglish

Summary

Important Safety Instructions

Important Medical Information

Warnings

SKIN INJECTION HAZARD

High-pressure fluid can pierce skin, causing serious injury. Get immediate surgical treatment.

FIRE AND EXPLOSION HAZARD

Flammable fumes can ignite or explode. Static sparking can cause ignition. Prevent fire and explosion.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury. Always wear appropriate protective equipment.

PRESSURIZED ALUMINUM PARTS HAZARD

Incompatible fluids can cause chemical reaction and equipment rupture.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment to prevent serious injury.

Grounding

Setup

Pressure Relief Procedure

Procedure to relieve pressure to prevent injury before cleaning or servicing.

Gun Trigger Lock

Engage trigger lock when gun is not in use to prevent accidental firing.

Install Tip and Tip Guard on Gun

Instructions for installing the spray tip and guard to prevent leaks and injury.

Connect Gun to Sprayer

Steps for connecting the spray gun to the sprayer using the supply hose.

Operation

Aligning Spray

How to align the spray guard for horizontal or vertical spray patterns.

Spraying

Steps for holding the gun, triggering, and adjusting pressure for spraying.

Clear Spray Tip Clog

Procedure to clear a clogged spray tip using the reversible tip function.

Cleanup

Steps for flushing the gun and cleaning after use.

Parts

Tip and Guard

Maintenance

Cleaning/Replacing Filter

Procedure for cleaning or replacing the filter to maintain gun performance.

Repair/Replacement

Replacing Needle

Steps for safely removing and installing a new needle assembly.

Aligning Handle

How to realign the handle if it doesn't match the housing after tightening.

Technical Specifications

Graco Standard Warranty

Graco Information

Related product manuals