To Next PageTo Next Page
Need help?Do you have a question about the Graco Contractor PC and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Maximum Pressure | 3000 PSI |
| Max Tip Size | 0.021 inches |
| Power Source | Electric |
| Material | Metal and Plastic |
| Tip Size Compatibility | 0.009 - 0.021 inch |
| Hose Length | 50 feet |
| Motor Type | DC |
High-pressure fluid can pierce skin, causing serious injury or amputation. Seek immediate treatment.
Flammable fumes or static sparking can cause ignition or explosion in the work area.
Misuse of equipment can lead to death or serious injury. Follow operating instructions.
Incompatible fluids can cause chemical reactions and equipment rupture. Check compatibility.
Wear appropriate gear (eyewear, hearing protection, respirator, clothing, gloves) for safety.
Procedure to relieve pressure before servicing or cleaning the equipment.
How to engage the trigger lock to prevent accidental spraying.
Adjusting the trigger length for user preference.
Instructions for installing the spray tip and tip guard correctly.
Steps to connect the spray gun to the sprayer system.
How to align the spray tip and guard for horizontal or vertical patterns.
Procedure to clear particles or debris from a clogged spray tip.
Instructions for flushing the gun and cleaning parts after use.
Lists and diagram of the main gun parts.
Lists and diagram of spray tip and guard parts.
Procedure to clean or replace the gun's filter for optimal performance.
Procedure for cleaning the gun's internal cartridge.
Step-by-step guide for removing and installing a new gun cartridge.
Instructions for realigning the gun handle if it does not match the housing.
