Graco MAGNUM 309225W User Manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001
309225W
Operation
Airless Sprayers
- For portable spray applications of architectural paints and coatings -
(Specifications, page 2.)
US Patent 6,752,067
European Patent 1 208 287
Korean Patent 10-0668583
ti4309a
WLD
WLD
WLD
MAGNUM dx
M
AGNUM XR7
M
AGNUM XR5
M
AGNUM XR9
Model 232735
Model 232740
Model 232750
Model 232745
IMPORTANT SAFETY INSTRUCTIONS.
Read all warnings and instructions in this
manual. Save these instructions. See page
2 for model and series information including
dispense rate, recommended hose length,
guns, and maximum working pressure.
Use water based or mineral spirit-type material only.
Do not use materials having flash points lower than
70°F (21°C). For more information about your mate-
rial request MSDS from distributor or retailer.
Model 247328
Visit our website;
http://Magnum.Graco.com

Graco MAGNUM 309225W Specifications

General

Brand	Graco
Model	MAGNUM 309225W
Category	Paint Sprayer
Language	English

Summary

Sprayer Operation Overview

Important Safety Instructions

Read all warnings and instructions before use. Save these instructions for future reference.

Safety Warnings and Hazards

Fire and Explosion Safety

Precautions to prevent ignition of flammable fumes and materials.

Electrical Shock Prevention

Safety measures to avoid electrical shock during operation and maintenance.

Skin Injection Hazard Warning

Warning about high-pressure fluid injection and immediate medical treatment.

Equipment Misuse Risks

Risks associated with exceeding ratings, altering equipment, and improper usage.

Pressurized Aluminum Parts Safety

Warning against using specific solvents with aluminum components to prevent rupture.

Toxic Fluid and Fumes Precautions

Risks of serious injury or death from exposure to toxic fluids or fumes.

Personal Protective Equipment (PPE)

Mandatory protective gear for safe operation, servicing, and presence in the operating area.

Sprayer Installation Guide

Grounding and Electrical Setup

Essential steps for safe electrical connection and grounding of the sprayer.

Sprayer Operation Procedures

Pressure Relief Procedure

Steps to safely relieve system pressure before servicing or shutdown.

Using the Trigger Lock

Pressure Control Knob Settings

Sprayer Setup Instructions

Sprayer Priming Procedures

Installing Spray Tip and Guard

How to Unclog a Spray Tip

Spray Tip Selection Guide

Choosing the Right Spray Tip

Airless Spraying Techniques

Preventing Excessive Tip Wear

Adjusting Spray Pressure

Basic Spraying Techniques

Sprayer Shutdown and Cleaning

Pail Flushing Procedure

Power Flush Procedure

Sprayer Troubleshooting Guide

Sprayer Maintenance and Service