Storage
26 332689D
5. When storage fluid comes out of prime tube (5-10
seconds) turn power switch OFF.
6. Move Prime/Spray valve to SPRAY to keep storage
fluid in sprayer during storage.
Stowing Sprayer
1. Screw inlet screen onto suction tube.
2. Coil hose. Leave it connected to sprayer. Wrap
hose around hose wrap bracket or sprayer stand.
3. Secure a plastic bag around suction tube to catch
any drips.
4. Store sprayer indoors.
NOTICE
• Before storing sprayer make sure all water is
drained out of sprayer and hoses.
• Do not allow water to freeze in sprayer or hose.
• Do not store sprayer under pressure.
To Next Page
Loading...
