Start Up
3A6342A 23
5. Transfer Drain Tube to paint pail.
6. Install Spray Tip Guard. Rotate Spray
Tip back to SPRAY position and ensure
the Spray Tip Guard is tight.
You are now ready to spray!
NOTE: It is normal for the motor to stop once
the sprayer is primed and under pressure.
Refilling Paint Pail
When the paint pail runs low and the Spray
Gun stops spraying, refill the paint pail and
repeat the Fill Pump (Prime Pump)
procedure, then the Fill Spray Gun and
Hose procedure.
To Next Page
Loading...
Need help?
General
