Graef ES 70 - Steam Wetness or Steam Pump Rate

10
EN
•Whilestillholdingdownthe„STEAM“buttonbrieflypressthe„POWER“buttonandrelease.
•Release„STEAM“button.
•This activates the programmability of the Steam Temperature.
•Thelightsbehindthe„COFFEE“and„HOTWATER“buttonswillstartflashing.
Within30secondspressoneoftheashingbuttonsdependingontherequiredtemperatureadjust-
ment.
•Up(+)asetting:Press„HOTWATER“
•Down(-)asetting:Press„COFFEE“
When you have selected a new temperature setting the unit will sound a sequence of beeps to indi-
cate the new temperature setting.
Tosaveyoursettingspressandholddownthe„STEAM“buttonfor3seconds.Asinglelongbeepwill
sound to indicate your settings have been saved.
Steam Wetness or Steam Pump Rate
The steam pump rate of this unit has been pre-set. Modifying the steam pump rate enables you to
make the steam wetter or dryer and aids in the delivery of a powerful, dry steam - ideal for texturing
milk.Thesteampumpratecanbemodiedinowrateincrementsupordownshoulditbedesired.
To do this you need to follow the instructions below:
•Switch off the unit.
•Pressthe„HOTWATER“buttonfor3seconds.
•Whilestillholdingdownthe„HOTWATER“buttonbrieflypressthe„POWER“buttonandrelease.
•Release„HOTWATER“button.
•This activates the programmability of the steam pump rate.
•Thelightsbehindthe„COFFEE“and„STEAM“buttonswillstartflashing.