Graef ES 70 - Cleaning set; Descaling

12
EN
•After you have removed the drip dish, you will find the cleaning set in the interior of the unit on the
plastic.
•Take out the cleaning set.
•Clean the holes in the filter insert with the thin end of the cleaning pin.
•Use the thick end of the cleaning pin to clean the milk frother/hot water nozzle pipe.
•Then clean the pipe with a moist cloth.
Descaling
Just as with any unit that is operated with water, the group handle automatic machine also requires
periodic descaling.
You can use a commercially available descaler for descaling your coffee machine.
To do so, proceed as follows:
•Remove the water tank and completely empty it.
•Fill the water tank with water again and mix the water as stated in the descaler manufacturer‘s in-
structions.
•Put the water tank back into the unit.
•Use a small brush to clean the brewing head. Remove the coffee remnants.
•Now place a large container under the brewing head.
•Switch on the unit.
•Assoonasitisready,press„COFFEE“.
•As soon as the container is full, empty it and repeat the process several times.
•After multiple repetitions, switch off the unit for 10 - 15 minutes so that the descaler can achieve
its full effect.
•After that, switch the machine back on.