Graef MS 701 - Prior to First Use; Making Milk Froth

16
PRIOR TO FIRST USE
Before using the unit for the rst time, clean as described in the
Cleaning chapter.
MAKING MILK FROTH
• Connect the unit to
the power grid.
• Remove the cap.
• Insert the blunger
with spiral. (magnet
down)
• Put the stainless
steel tank on the
base station and
pour the milk into
the stainless steel
tank.
Notice: Only pour the milk into the stainless steel tank, not
into the base station.
MAX mark is only for plunger without spiral.
• If the lling level of plunger with spiral is too high it will overow
the tank.