1
SECTION I
GENERAL DESCRIPTION
1.0 GENERAL
Congratulations! You have just purchased the only
truly modern, full-featured Pediatric scale.
Introduced in 1979, The Scale-Tronix 4800 was the
preferred pediatric scale for hospitals due to its
accuracy, reliability and rugged stainless steel
construction. Years later, we updated the scale’s
electronics to make it even more user friendly and
called the 4802. We added the 2 to denote the
second generation of our great scale. Currently, most
of these scales are still in everyday use. Scale-Tronix
has not stopped innovating and trying to incorporate
all of the great features and durability of our previous
models to meet the challenges of our modern world.
We now introduce the new improved 4802 with the
significant improvement of using disposable long life
alkaline “D” size flashlight batteries.
The 4802 can be operated from AC line power and
left on continuously for fast convenient weights; or it
can be transported on a cart, operation from its
self-contained “D” batteries for true portable
operation. The scale’s internal microcomputer will
automatically keep the scale “on” when plugged in
and time out after a period of inactivity when
operating from the batteries. Successive weighing’s
will automatically reset the time and keep the scale
turned on as long as required.
We have replaced the rechargeable battery with
standard heavy duty disposable DURACELL alkaline
D size flashlight batteries which provides several
thousand weighing’s (DURACELL only). A flashing
low battery annunciator provides adequate warning to
change batteries soon.
The clear acrylic weighing cradle readily unplugs from
the scale for easy clean-up or exchange. A variety of
cradle sizes and configurations are available to suit
your weighing needs, including four-sided and
oversized cradles. A length gauge, marked in both
inches and centimeters or centimeters only, is
conveniently provided on top of the cradle for
measuring the infant’s length during the weighing
procedure. Disposable paper cradle liners are
available to reduce clean-up and prevent
cross-contamination.
The scale’s enclosure is constructed of heavy gauge
stainless steel for durability and minimum
maintenance. Carrying handles are provided on both
sides of the enclosure for safe, convenient
movement. In addition to serving as a handle, the
rear handle serves as a line cord holder, and along
with the side handles, serve as a bumper to prevent
damage or interference with the scale if it is pushed
against a wall or other surface. Users appreciate
these helpful safeguards and features.
A stainless steel weighing cart is available that makes
the model 4802 PEDIATRIC SCALE a self-contained
mobile weighing station. The cart also features a
dispenser for disposable scale liners.
The scale employ the latest in microcomputer control
combined with user friendly software. This provides
the operator with an accurate, rugged and
easy-to-use scale. Advanced Digital Signal
Processing (DSP) provides accurate data at all times.
Audible response by a series of beeps provides
excellent operator feedback for ease of operation.
The beeper can be disabled if required.
An internal non-volatile memory stores the last
patient’s weight for later recall and charting. User
programmable features allow the operator to select
automatic shut-off times, weight resolution, weight
units, etc.
A Data Port provides serial data output to a printer,
personal computer or EMR data collection system.
Consult the factory for further details.
1.10 MECHANICAL FEATURES:
A summary of the mechanical features follows:
A. Heavy gauge stainless steel enclosure for
durability and low maintenance. Angled front
panel to maximize readability.
B. Side handles for carrying convenience and
cradle protection.
C. Rear handle for carrying, cord storage and
scale protection.
To Next Page
Loading...