Gram CI 55050 V - Component Maintenance

35
CLEANING AND MAINTENANCE
Removing wire shelf supports
Installing wire shelf supports
12
12
Wire shelf supports
(Telescopic guides do not appear in all fur-
nace models)
Wire shelf supports are esay to remove for
wasking. Pull the front catch, then tilt the sup-
port and remove from the rear catch.
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched o󰀨 before replacing the bulb.
 Set all control knobs to the position “”/“0”
and disconnect the mains plug,
 unscrew and wash the lamp cover and
then wipe it dry.
 unscrew the light bulb from the socket,
replace the bulb with a new one – a high
temperature bulb (300°C) with the follow-
ing parameters:
 - voltage 230 V
 - power 25 W
 - thread E14.
 Screw the bulb in, making sure it is prop-
erly inserted into the ceramic socket.
 Screw in the lamp cover.
Oven light bulb