Need help?Do you have a question about the Gram EK Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Auto Power Off | Yes |
| Capacity | 6 kg |
| Readability | 0.1 g |
| Units | g, oz |
Explains symbols used on the balance display for weighing modes and status indicators.
Describes the function of each button on the balance, like TARE/CAL, UNIT/UP, and MENU/PRT.
Advises on selecting an appropriate installation location to ensure accurate weighing performance.
Outlines critical precautions to avoid when installing and operating the balance to ensure safety and accuracy.
Instructs users to check the package contents and ensure the balance is not damaged upon arrival.
Details the step-by-step procedure for powering on the balance, including connecting the power cord and voltage considerations.
Explains the importance of warming up the balance to ensure stable temperature for accurate calibration or measurement.
Guides users through the process of calibrating the balance, emphasizing proper preparation and weight usage.
Describes the specific procedure for performing linearity calibration on the balance for improved accuracy.
Explains how to change the weighing units displayed on the balance according to different regional or industrial requirements.
Details how to set the balance to zero, typically when the object's weight is less than 2% of the total range.
Explains the tare function, used to zero the balance when weighing an object greater than 2% of the total range.
Addresses issues where the balance display is not showing any output and provides troubleshooting steps.
Explains causes for unstable weighing readings and offers solutions to improve accuracy and stability.
Describes the meaning of the "- - OL- -" display and how to resolve overload or load cell issues.
Covers discrepancies in weighing values compared to calibration weights and suggests recalibration.
Details troubleshooting steps when the balance does not respond to input or shows errors like PCB problems.
Explains the cause of a flickering power symbol, often related to low battery voltage, and suggests solutions.
To Next Page
