Need help?Do you have a question about the Gram VK Series and is the answer not in the manual?
Inspect package for transport damage and verify all parts are present.
Instructions for attaching the weighing pan and securing the scale.
How to adjust feet to center the bubble in the level indicator for precise measurements.
Explanation of the weight, unit weight, and total count display windows and status symbols.
Pin configuration for the connector used to link the main and remote scales.
Steps for physically connecting the remote platform to the main scale unit.
Navigating parameter settings (P-00 to P-07) for dual channel operation.
Resetting the scale to zero before weighing to ensure accurate measurements.
Using tare to zero out container weight and preset tare for specific weights.
Entering a known unit weight value to start piece counting.
Determining unit weight by counting a known quantity of samples.
Utilizing ACAI for enhanced accuracy in piece counting by adjusting reference weight.
Choosing between manual or automatic accumulation of data.
Selecting and setting up the format for printed output reports.
Defining the rules for serial number incrementing or generation.
Establishing the upper limit for the serial number sequence.
Defining the upper boundary for the quantity check feature.
Defining the lower boundary for the quantity check feature.
Defining the upper boundary for the weight check feature.
Procedure for saving a unit weight value to a specific ID number.
To Next Page
General
