Do you have a question about the Gram K3 SERIES and is the answer not in the manual?
Display | LCD |
---|---|
Auto-off | Yes |
Capacity | 3 kg |
Readability | 0.1 g |
Units | g, oz |
Functions | Tare |
Explains how to find the weight of an object by placing it on the platform and observing the display.
Details the tare function, including normal tare, fixed tare, and managing memorized tare values.
Explains the scale's zeroing function, including automatic zero tracking and limitations.
Describes how to perform an LCD display test to verify all segments and pictograms are functioning correctly.
Explains how to activate high-resolution mode for increased scale precision and finer divisions.
Details the HOLD mode, which keeps the last stable weight displayed even after the load is removed.
Describes the High/Low limit control mode for checking if weights fall within specified ranges.
Explains the dosage mode for automated dispensing of products at controlled speeds.
Details the piece counter mode, allowing counting of items based on unit weight.
Covers the Product Look-Up (PLU) function for selecting and associating product codes with weighing records.
Instructions on how to print weighing tickets, including single tickets and totalizer tickets.
Explains how the scale can operate as a remote display for another scale.
Details the XTREM mode, where the scale acts as a terminal for a digital scale.
Describes ticket printing formats for specific GRAM printers and Q2 labellers.
Explains the frame data format compatible with the GRAM RD3 weight repeater display.
Covers the frame data format for PC connection via USB adapter, emulating keypad input.
Details the byte frame format used for transmitting weight information in PCO format.
Lists available commands and responses for remote control of the K3 indicator.
Details how to access the settings menu upon unit startup for various configurations.
Step-by-step guide for calibrating the scale using known weights and geographical data.