Why won't my Gram Dishwasher start?
Several reasons may prevent your Gram Dishwasher from starting. First, ensure the dishwasher is properly plugged in and switched on using the On/Off button. Check your indoor fuses and ensure the water inlet tap is open. Also, make sure the dishwasher door is fully closed and that the water inlet hose and machine filters are not clogged.
What to do if my Gram OM 6640-90 RT/1 is unable to discharge water?
If your Gram Dishwasher can't discharge water, it may be due to a clogged water discharge hose or filters. Cancel the current program. If the error persists, contact for service.
Why does my Gram OM 6640-90 RT/1 Dishwasher stop during washing?
If your Gram Dishwasher stops mid-cycle, check the mains power supply. Also, check the water tap to ensure there is no water inlet failure.
What to do for Gram Dishwasher water inlet system failure?
Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of the hose. If the error continues, contact for service.
How to prevent food waste on dishes after washing in Gram OM 6640-90 RT/1?
To prevent food waste from remaining on dishes, avoid overloading the baskets and ensure dishes aren't leaning against each other; refer to the loading instructions. Use the correct amount of detergent as indicated in the programme table, and select the most appropriate wash programme. Clean the spray arms with thin objects to remove any food waste clogging them, and verify that the drain hose and filters are correctly fitted.
What to do if water remains inside my Gram Dishwasher?
If water remains inside your Gram dishwasher, check the drain hose for clogs or twists and clean or untwist it. Also, clean the filters. If the programme is still running, wait until it finishes.
Why are there whitish stains on my dishes after using Gram OM 6640-90 RT/1 Dishwasher?
Whitish stains on dishes can result from several factors. Ensure you are using the correct amount of detergent as instructed in the programme table. Also, your rinse aid dosage and/or water softener setting may be too low; increase these levels. If you have hard water, increase the water softener level and add salt. Finally, check that the salt compartment cap is closed properly.
How to remove rust stains on dishes from Gram OM 6640-90 RT/1 Dishwasher?
Rust stains may appear if the stainless-steel quality of your dishes is insufficient, so use only dishwasher-proof sets. Adjust the water hardness level using the water hardness table if there's a high level of salt in the wash water. Ensure the salt compartment cap is properly closed and use a funnel when filling with salt to avoid spillage. For a poor mains grounding, consult a qualified electrician immediately.
Why aren't my dishes drying in my Gram Dishwasher?
If your dishes aren't drying, make sure you've selected a programme with a drying option. Also, the rinse aid dosage might be set too low, so increase the rinse aid dosage setting.
What causes shaking noises in Gram Dishwasher during wash?
Shaking and hitting noises during a wash cycle can occur if the spray arm is hitting dishes in the lower basket. Move or remove any items that are blocking the spray arm.
General| Brand | Gram |
|---|---|
| Model | OM 6640-90 RT/1 |
| Category | Dishwasher |
| Language | English |
To Next Page
