DP720 Package Content
Connecting Base Station
To set up the DP75x DECT Cordless VoIP Base Station, please follow the steps below:
DP755/DP752 Back View
DP750 Back view
You have two options for power and network connection of the base station: AC power or Power over Ethernet (PoE).
Connecting via AC power
1. Connect the micro-USB connector to the related port on the base station and connect the other end of the power adapter
to an electrical power outlet.
2. Connect the supplied Ethernet cable between the Internet port on the base station and the Internet port in your network
or the switch/hub device port.
Connecting via PoE
Note
Check the package before installation. If you find anything missing, contact your system administrator.
Note
For better signal range, we recommend installing DP75x with LED side facing toward the usage area. Ceiling mount for
DP755/DP752 is recommended for better coverage.
To Next Page
Loading...
Need help?
General
