Deploying DP760 Repeater
DP750 Base Station can support up to 5 DP760 DECT Repeater stations to extend the coverage area of
the base in all directions. When the repeater powers on, it searches for signals from the base and any other
repeaters registered to the same base and it will automatically connect to the strongest available signal.
The base can hand-off calls to the repeaters as the user moves from one coverage area to another. When
connected to the repeater, the DP720 handsets operate as it’s connected to the base, and the hand-off
from the base to the repeater can be completely invisible to the end user, even during an active call.
Important Note: DP760 can relay up to 2 concurrent calls.
Figure 7: 5 Repeaters in Star
Users will need to have the repeater close the base station during the pairing process, and once pairing is
successful the repeater can be moved far away to its intended placement where it will replicate the weak
signal over the non-covered areas. But in the same time the repeater should be close to the base station
in order to have enough coverage overlap for better synchronization.
To Next Page
Loading...
Need help?
General
