Grandstream Networks GRP2602W Administration Guide

P a g e | 62
GRP260x Administration Guide
Version 1.0.3.42
Network Settings Page Definitions
Table 11: Network Page Definitions
Network Settings → Ethernet Settings
Internet Protocol
Selects “IPv4 Only”, “IPv6 Only”, “Both, prefer IPv4” or “Both, prefer IPv6”.
The default setting is “IPv4 only”.
IPv4 Address
IPv4 Address
Allows users to configure the appropriate network settings on the phone to
obtain IPv4 address. Users could select “DHCP”, “Static IP” or “PPPoE”. By
default, it is set to “DHCP”.
Host name (Option 12)
Specifies the name of the client. This field is optional but may be required by
Internet Service Providers.
Vendor Class ID (Option
60)
Used by clients and servers to exchange vendor class ID.
IPv4 Address
Enter the IP address when static IP is used.
Subnet Mask
Enter the Subnet Mask when static IP is used for IPv4.
Gateway
Enter the Default Gateway when static IP is used for IPv4.
PPPoE Account ID
Enter the PPPoE account ID.
PPPoE Password
Enter the PPPoE Password.
PPPoE Service Name
Enter the PPPoE Service Name.
DNS Server 1
Enter the DNS Server 1 when static IP is used for IPv4.
DNS Server 2
Enter the DNS Server 2 when static IP is used for IPv4.
Preferred DNS Server
Enters the Preferred DNS Server for IPv4.
IPv6 Address
IPv6 Address Type
Allows users to configure the appropriate network settings on the phone to
obtain IPv6 address. Users could select “Auto-configured” or “Statically
configured” for the IPv6 address type.
Static IPv6 Address
Enter the static IPv6 address when Full Static is used in “Statically configured”
IPv6 address type.
“237.11.10.11:6767”
• “Label” could be the description you want to use.
For details, please check the “Multicast Paging User Guide” on our Website.

Grandstream Networks GRP2602W Specifications

General

Brand	Grandstream Networks
Model	GRP2602W
Category	IP Phone
Language	English