GRP260x Administration Guide
Version 1.0.3.42
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
AuthUser: Users with security level authNoPriv and context name as auth.
privUser : Users with security level authPriv and context name as priv.
Select the Authentication Protocol: “None” or “MD5” or “SHA.”
Select the Privacy Protocol: “None” or “AES” or “DES”.
Enter the Authentication Key for SNMPv3.
Enter the Privacy Key for SNMPv3.
Choose the Trap version of the SNMP trap receiver.
IP address of trap destination.
Port of Trap destination (Default 162)
Time interval between traps (Default is 5).
Community string associated to the trap. It must match the community string
of the trap receiver.
Username for SNMPv3 Trap.
noAuthUser: Users with security level noAuthnoPriv and context name as
noAuth.
authUser: Users with security level authNoPriv and context name as auth.
privUser: Users with security level authPriv and context name as priv.
Trap Authentication
Protocol
Select the Authentication Protocol: “None” or “MD5” or “SHA”.
Select the Privacy Protocol: “None” or “AES/AES128” or “DES”.
Enter the Trap Authentication Key.
Enter the Trap Privacy Key.
Programmable keys Page Definitions
Table 12: Programmable Keys Page Definitions
Programmable keys → Multi-Purpose Keys (GRP2604 only)
• Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed or enter the IP address to set the Direct IP call as