TELEPHONY FEATURES
Make Phone Calls
Handset, Speaker and Headset Mode
The GRP260X allows users to switch among handset, speaker or headset when making calls. Press the
Hook Switch to switch to handset; press the Headset button to switch to headset mode; or press
the Speaker button to switch to speaker.
Multiple SIP Accounts and Lines
The GRP2601 supports 2 SIP accounts and 2 line; GRP2602 supports up to 4 SIP accounts with 2 line
keys; GRP2603/GRP2604 supports up to 6 SIP accounts with 3 line keys. Each account is capable of
independent SIP server, user, and NAT settings. In off hook state, select an idle line and the dial tone will
be heard. To make a call, select the line you wish to use. The corresponding LINE LED will light up in green.
The user can switch lines before dialing any number by pressing the LINE buttons.
Since the GRP260x can have more SIP accounts than the supported lines, the phone is supporting two line
key modes; “Line mode” and “Account mode”. The main difference between the two is that during calls each
line key displays the status of a call line in “Line Mode”; while in “Account mode”, available accounts will be
displayed in each line key, which is handy in case multiple accounts are using the same line. The figures
below show the examples and difference of call screens between the two modes:
Line mode: Each line key is displaying the status of a call line
Figure 11 : Key mode configured as line mode
Account mode: An available account is displayed in each Line key. User can view the current line and the
number of all lines in the upper right corner of the call interface.
To Next Page
Loading...
Need help?
General
