GRP26XX User Guide
Version 1.0.0.31
to the desired character.
▪ Shiftable: After pressing the number button, user will see the
IDs of the characters that matching to the button. User can
select the desired character by entering the corresponding ID
on keypad.
• Date Time
o Allow DHCP Option 42 to override NTP server
o Allow DHCP Option 2 to override Time Zone setting
o Time Settings
It is used to configure date and time on the phone.
• Search Mode
Specifies the phonebook search mode to QuickMatch or
ExactMatch. By default, it is QuickMatch.
Phone sub menu includes the following options:
• SIP
Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password,
SIP Transport and Audio information to register SIP account on the phone.
• Call Features
Configures call forward features for Forward All, Forward Busy, Forward No
Answer and No Answer Timeout.
System sub menu includes the following options:
• Network
o Internet Protocol
Selects Prefer IPv4 / Prefer IPv6 / IPv4 only or IPv6 only. The default
setting is “IPv4 only”.
o IP Setting
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account
ID and password; Configures static IP address, Netmask, Gateway,
DNS Server 1 and DNS Server 2.
o 802.1X
Enables/Disables 802.1X mode; Configures 802.1x identity and MD5
password.
o Layer 2 QoS
Configures 802.1Q/VLAN Tag and priority value. Select “Reset VLAN
Config” to reset VLAN configuration.
• Wi-Fi Settings (GRP2612W & GRP2614 only)
o Enable/disable
To Next Page
Loading...
