3. If users would like to re-establish conference call. Press the “ReConf” softkey right after the
conference call is split
Figure 30 : Split conference
❑ End Conference:
1. Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
2. Users could press the “EndCall” softkey or simply hang up to terminate the conference call.
Easy Conference Mode
GRP2612/GRP2612P/GRP2612W/GRP2613/GRP2614 supports Easy Conference Mode, which can be
used combined with the traditional way to establish the conference.
❑ Initiate a conference call.
1. Establish 1 call;
2. Press CONF key and a new line will be brought up using the same account;
3. Dial the number and press SEND key to establish the second call;
4. Press CONF key or press the “ConfCall” softkey to establish the conference.
❑ Split and Re-conference.
1. During the conference, press HOLD key. The conference call will be split and both calls will be put
on hold separately with 2 LINE keys blinking in green;
2. Press a LINE key to resume the 2-way conversation;
3. If users would like to re-establish conference call, before 1 separate LINE is selected, press the
“ReConf” softkey right after the conference call is split.
To Next Page
Loading...
