If the target number is already saved in phonebook, when entering the first several digits, the phone will
display a list of matching numbers. If the target number appears on the list, user could select the number
using Up/Down key and dial out. GRP2612/GRP2612P/GRP2612W/GRP2614 has predefined call feature
code (the first digit is *). When user enters * as the first digit of the target number, the phone will list all the
available feature codes.
• Redial. Redial the last dialed number.
1. Take handset off hook; or
• Press Speaker button; or
• Press Headset button with headset plugged in; or
• Press an available LINE key to activate speaker; or
• When the phone is in idle state;
2. Press SEND key, or the REDIAL softkey.
• Via Call History. Dial the number logged in phone's call history.
1. Press MENU button to bring up the main menu then enter Call History; or
2. Press “History” soft key when the phone is in idle state;
3. Select the entry you would like to call using the navigation arrow keys;
4. Press SEND button to dial out.
• Via Phonebook. Dial the number from the phonebook.
1. Press MENU button to bring up the main menu then enter Contacts; or
Press Contacts button;
2. Enter Local Phonebook/ Broadsoft Phonebook using the navigation arrow keys;
3. Select the contact you would like to call
Note: Pressing the MENU button, users can edit the phone number and choose which account to
dial that number by clicking “Edit / Dial” soft key.
4. Press SEND button to dial the selected contact.
• Speed Dial from Line Key. Dial the number configured as Speed Dial on Line Key.
1. Go to phone's Web GUI→Settings→Programmable Keys, configure the Line Key Mode as Speed
To Next Page
Loading...
