To Next Page

To Previous Page

In this example, the phone shows account 1’s basic SIP information and that account 1 is registered.

Make Call

General format

The general format of CTI command to initiate a call is:

http://Phone-IP-Address/cgi-bin/api-make_call?passcode=PASSWORD&phonenumber=NUMBER

Example

Request http://192.168.5.135/cgi-bin/api-make_call?passcode=admin&phonenumber=3501

Response { “response”: “success”, “body”: true }

System Operations Functions

General Format

The general CTI command to send phone system operations is:

http://Phone-IP-Address/cgi-bin/api-sys_operation?passcode=PASSWORD&request=OPERATION

Examples

Operation Function Example

REBOOT Reboot the phone

http://192.168.5.135/cgi-bin/api-sys_operation?

passcode=admin&request=REBOOT

RESET

Reset the phone to default

settings

http://192.168.5.135/cgi-bin/api-sys_operation?

passcode=admin&request=RESET

Positive answer

If accepted, the command will be run instantly on the phone and below positive answer can be returned:

Reboot: {“response”:”success”, “body”: “savereboot”}

Reset: {“response”:”success”, “body”: “reset”}

Negative answer

If not accepted, the phone will not react to it and below negative answer can be returned:

{“response”:”error”, “body”: “unknown”}

Response

{"response":"success", "body": [{"id": 1, "sip_server":"testsipserver.com", "sip_id": "1234", "name":

"test_account","reg": 1}, {"id": 2, "sip_server": "", "sip_id": "", "name":"", "reg": 0}]}

Grandstream Networks GRP2616 Guide

Other manuals for Grandstream Networks GRP2616