Take handset off hook, or
o Press Speaker button,
o Press Headset button with headset plugged in,
o Press an available LINE key to activate speaker.
You shall hear dial tone after off hook.
Enter the number.
Press SEND key or # to dial out.
Predictive dialing: While dialing, the phone will predict and list candidates of the target number based
on the entered digits. If the target number exists in the phonebook, the phone will display a list of
matched numbers and the user could select the number using the Up/Down key and dial out.
Redial: Redial the last dialed number.
Take handset off hook, or
o Press Speaker button,
o Press Headset button with headset plugged in,
o Press an available LINE key to activate speaker,
press SEND key, or the REDIAL softkey.
Via Call History: Dial the number logged in phone's call history.
Press MENU button to bring up the main menu.
Enter Call History, then select Local Call Log or Broadsoft Call log.
Select the entry you would like to call using the navigation arrow keys.
Press SEND button to dial out.
Via Phonebook: Dial the number from the phonebook.
Press Contacts button.
Under Contacts, enter Local Phonebook/ Broadsoft Phonebook/LDAP directory using the
navigation arrow key.
Select the contact you would like to call using the navigation arrow key.
Press SEND button to dial the selected contact.
Speed Dial from Line Key: Dial the number configured as Speed Dial on Line Key.
Go to phone's Web GUI->Settings->Programmable Keys->virtual Multi-Purpose Keys, configure
the Line’s Key Mode as Speed Dial. Select the account to dial from, then enter the Name and User
ID (the number to be dialed out) for the Line Key. Click on "Save VPK" at the bottom of the Web
GUI page.
Directly press the Speed Dial key to dial out.
Call Return: Dial the last answered call.
Go to phone's Web GUI->Settings->Programmable Keys->virtual Multi-Purpose Keys, configure
the Line's Key Mode as Call Return. Select the account to dial from, no Name or User ID has to be
To Next Page
Loading...
Need help?
General
