Split and Re-conference.
During the conference, press HOLD Softkey. The conference call will be split and the calls will be
put on hold separately with the LINE keys blinking in green.
Select 1 LINE key and press to resume the 2-way conversation.
If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split.
End Conference.
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP1760/GXP1780/GXP1782 supports Easy Conference Mode, which can be used combined with the
traditional way to establish the conference.
Initiate a conference call.
Establish 1 call.
Press CONF key and a new line will be brought up using the same account.
Dial the number and press SEND key to establish the second call.
Press CONF key or press the ConfCall softkey to establish the conference.
Join more parties in established conference call.
Establish conference call.
Press CONF key and a new line will be brought up using the same account.
Dial the number and press SEND key to establish the second call.
Press CONF key or press the ConfCall softkey to join the new party in the established conference.
Split and Re-conference.
During the conference, press HOLD softkey. The conference call will be split and both calls will be
put on hold separately with 2 LINE keys blinking in green.
Select 1 LINE key and press to resume the 2-way conversation.
If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
Cancel Conference.
If users decide not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key.
This will end the second call and the screen will show the first call on hold.
End Conference.
Users could press the EndCall softkey or simply hang up the call to terminate the conference call.