Grandstream Networks GXV33 Series Configuration Guide

This Configuration Guide is written as a general guide on how to configure the Grandstream
phone model GXV3370 to work with PBXware 5.3.6.
Requirements
Identifying Phone Model
To start and successfully complete registration of your Grandstream phone, you need to know
which phone model to set up.
On the back of each Grandstream phone, there is model information that you should check.
Although various phone models can have exactly the same requirements and installation
procedures, they can also have significantly different requirements and installation procedures,
so that is why it is important to know the model you own which results in you setting up the
device successfully.
Phone Firmware
Make sure that your phone is loaded with an appropriate firmware version, 1.0.3.8.
■
To find out the firmware version of your Grandstream phone model, open a new browser
■
window and enter your phone IP address in order to access the phone's web administration
interface login screen. Example: http://192.168.1.22.
Log in to the phone's web administration interface with your username and password. Please
■
note that the factory default login details are as follows: username admin and password
admin. You will be prompted to change the default password.
DHCP Server

Grandstream Networks GXV33 Series Specifications

General

Brand	Grandstream Networks
Model	GXV33 Series
Category	IP Phone
Language	English