Grandstream Networks GXV34 Series Administration Guide

Table 27: Phone Settings/Call Settings
Escape '#' as %23 in
SIP URI
Determines which characters will be included in the SIP INVITE URI if end users input #. If it is set to
“Yes”, the phone will replace the # by %23. Otherwise, it will include # in the SIP INVITE message.
Default is “Yes”.
Default Phone APP
Configures phone APP for the device. The default setting is Phone of Grandstream, but if you
develop a new phone application using SDK, you can choose the new one to replace the original. The
configuration of “Quickly Launch 3rd Party APP” is not available if the default phone application
changes.
Quickly Launch
Specified APP
Selects the specified application that launch quickly by offhook/clicking the Dial or Conference.
Once selected, the package name and activity of specified application will be displayed below. When
user offhooks / click the Dial or Conference application, it will automatically enter the configured
application interface. The default setting is blank, which means using GS phone application.
Record Mode
Configures recording mode.
● If set to (Default) “Record locally”, the phone will use the local recorder for call recording, and the
audio file will be saved according to the recorder setup.
● If set to “Record on PortaOne”, the phone will send the specified SIP messages to the
corresponding server;
● If set to “Record on UCM”, the phone will send the recording feature code to the UCM server to
request for recording, and the recording function will be executed by the server.
● If set to “SD card”, the phone will use the SD card for call recording.
● Set “Disabled” to ignore this feature
Enable Auto Record
When Call
Established
Configures whether to auto record when a call is established. If set to “Yes”, the call recording will
start automatically when the call is established.
Rejected Call
Notification
Enable/Disable rejected call notification. Once enabled, a missed call will prompt on LCD when reject
the incoming call.
Default is “No”.
Return Code When
Rejecting Incoming
Calls
When rejecting an incoming call, the phone will send the selected type of SIP response for the call.
Return Code When
DND Is Enabled
When DND is enabled, the phone will send the selected type of SIP response
Group Listen with
Speaker
Configures whether to enable speaker audio output when in a call with handset/headset. If enabled,
the speaker audio output is enabled, but you cannot talk through the speaker.
One-Way Call
Function Buttons
Users can configure and customize the call functions in the call interface during a normal call. The
available call functions are: Mute, Hold, Video, Record, Transfer, Call Details, New Call, Keyboard,
Media Channel, Conference.
Note:Users can choose only 3 of these functions to be shown on the call interface during a one-way
call.
Conference Call
Function Buttons
Users can configure and customize the call functions in the call interface during a conference. The
available call functions are: Invite, Mute, Hold, Record, Call Details, New Call, Keyboard, Media
Channel.
Note:Users can choose only 3 of these functions to be shown on the call interface during a
conference.
Call Function Button
Display Timeout (s)
Configures the timeout period for call function buttons display. If set to “0”, the buttons will be
always displayed. The value range is 0-30 seconds.

Grandstream Networks GXV34 Series Specifications

General

Brand	Grandstream Networks
Model	GXV34 Series
Category	Conference System
Language	English