Hostname
Enter a host name and find out the corresponding IP address.
It will also do reverse name lookup and find the host name for an IP address you specify.
Table 43: Maintenance/System Diagnosis
Maintenance/Event Notification
Set the URL for events on phone web GUI, and when the corresponding event occurs on the phone, the phone will send the
configured URL to SIP server. The dynamic variables in the URL will be replaced by the actual values of the phone before
sending to SIP server, in order to achieve the purpose of events notification. Here are the standards:
1. The IP address of the SIP server needs to be added at the beginning and separate the dynamic variables with a “/”.
2. The dynamic variables need to have a “$” at the beginning. For example: local=$local
3. If users need to add multiple dynamic variables in the same event, users could use “&” to connect with different dynamic
variables. For example: 192.168.40.207/mac=$mac&local=$local
4. When the corresponding event occurs on the phone, the phone will send the MAC address and phone number to server
address 192.168.40.207.
Bootup Completed Configures the event URL when phone boots up.
Incoming Call Configures the event URL when phone has an incoming call.
Outgoing Call Configures the event URL when phone has an outgoing call.
Offhook Configures the event URL when the phone is off-hook.
Onhook Configures the event URL when the phone is on-hook.
Missed Call Configures the event URL when the phone has new a missed call.
Connected Configures the event URL when a call is established.
Disconnected Configures the event URL when a call is disconnected.
DND On Configures the event URL when DND is enabled.
DND Off Configures the event URL when DND is disabled.
Forward On Configures the event URL when the forward feature is enabled on the phone.
Forward Off Configures the event URL when the forward feature is disabled on the phone.
Blind Transfer Configures the event URL when users transfer a call with blind transfer on the phone.
Attended Transfer Configures the event URL when users transfer a call with attended transfer on the phone.
On Hold Configures the event URL when users hold a call on the phone.
UnHold Configures the event URL when users resume a call on the phone.
Log On Configures the event URL when users log on the phone successfully.
Log Off Configures the event URL when users log off the phone.
Register Configures the event URL when an account in the phone is registered successfully.
Unregister Configures the event URL when an account in the phone is unregistered.
Table 44: Maintenance/Event Notification
Session Report
VQ RTCP-XR Session
Report
When enabled, phone will send a session quality report to the RTCP server at the end of each
call.
Interval Report
VQ RTCP-XR Interval
Report
When enabled, phone will send an interval quality report to the RTCP server periodically
throughout a call
To Next Page
Loading...
Need help?
General
