VQ RTCP-XR Interval
Report Period (s)
Configures the interval (in seconds) that the phone will send an interval quality report to the
RTCP server during a call.
Alert Report
Warning Threshold for
MOSLQ
Configures the threshold value of listening MOS score (MOS-LQ). The threshold value of MOS-
LQ will trigger the phone to send a warning alert quality report to the RTCP server.
Please note the configured threshold is 10 times the actual value.
Critical Threshold for
MOSLQ
Configures the threshold value of listening MOS score (MOS-LQ). The threshold value of MOS-
LQ will trigger the phone to send a critical alert quality report to the RTCP server.
Please note the configured threshold is 10 times the actual value.
Warning Threshold for
Delay (ms)
Configures the threshold value of one-way delay (in milliseconds) which will trigger the phone
to send a warning alert quality report to the RTCP server.
Critical Threshold for
Delay (ms)
Configures the threshold value of one-way delay (in milliseconds) which will trigger the phone
to send a critical alert quality report to the RTCP server.
Table 45: Maintenance/Voice Monitoring
Programmable Key
Format
Display Format
Configures the display format for the MPK. Users could select “Name”, “User ID” or
“Name(User ID)”. “Name” is the one saved in phone contacts. The default setting is
“Name, User ID, Key mode”.
Show Display Name from
Server
If selected, the display name on the server will replace the name users configured.
BLF
Key Mode
The key modes are:
Speed Dial: Press to dial the UserID when the accounts being configured as VPK.
Busy Lamp Field: Monitor the UserID status when the accounts being configured
as VPK.
Call Forward : Transfer the current active call to UserID when the accounts being
configured as VPK.
Call Intercom: Intercom/paging to the UserID when the accounts being configured
as VPK.
Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the
current active account. For example, if the phone is offhook and account 2 is active,
it will call the UserID when the accounts being configured as VPK.
Dial DTMF: Dial the DTMF digits of the UserID when the accounts being configured
as VPK during the call.
Call Park: Configure the call park feature code to park or retrieve the call.
Multicast Paging: For multicast sending, please fill in the display name in the
Settings and fill in the sending address in the multicast address.
Speed Conference: Quickly dial up multiple numbers to set up a meeting.
Dial Prefix: After configured, once pressed this key, all numbers use this account
will automatically add the prefix promptly
Account Configures the SIP account when the accounts being configured as VPK.
Display Name Configures the display name when the accounts being configured as VPK.
User ID
Configures the UserID for the corresponding VPK mode when the accounts being
configured as VPK.
To Next Page
Loading...
Need help?
General
