Grandstream Networks GXV34 Series Administration Guide

● Call Intercom: Intercom/paging to the User ID when the accounts being configured as VPK.
● Speed Dial via Active Account: Similar to Speed Dial but it will dial based on the current active
account.
For example, if the phone is offhook and account 2 is active, it will call the User ID when the accounts
being configured as VPK.
● Dial DTMF: Dial the DTMF digits of the User ID when the accounts being configured as VPK during
the call.
● Call Park: Configure the call park feature code to park/retrieve call.
● Multicast Paging: For multicast sending, please fill in the display name in the Settings and fill in the
sending address in the multicast address.
● Quick Conference: Quickly dial up multiple numbers to set up a meeting.
● Dial Prefix:After configured, once pressed this key, all numbers use this account will automatically
add the prefix promptly.
Account Configures the SIP account for the Programmable Key.
Display Name Configures the display name for the Programmable Key.
Number
Configures the number used by the corresponding Programmable Key mode for the Programmable
Key.
DTMF Content When key mode is set toDial DTMFit configures the dialed DTMF content.
Address When key mode is set toMulticast Paging, it configures the multiple broadcast address.
Conference name Set the name of speed meeting when the key mode is set toQuick Conference.
Mute all
memebers
Enable or disable mute all meeting members when key mode is set toQuick Conference.
Configure Configures the Number list when key mode is set toQuick Conference.
General Settings
General Settings
One Page Display
Mode
Configures whether to enable one page display mode. If set to "Yes", each extension board only shows
20 programmable keys, so keys 1-80 will be displayed on 4 extension boards.
Sync Backlight
with LCD
Configures whether to synchronize the backlight with LCD. If set to "Yes", the backlight will turn off
when LCD is in idle
EXT Sync Prompt When accessing EXT, configures whether to pop up the EXT synchronization prompt.
Enable Active MPK
Page
When enabled, GBX20 will auto swtich to the page that there are active MPKs.When unchecked, the
user needs to press the GXB20 buttons to switch MPK pages. It is enabled by default.
Hide BLF Remove
Status
Configures to hide the status information of the monitored line.When checked, BLF LED would not
update whether they are in a call or have an incoming/outgoing call.It is disabled by default.
Proxy Prefix
Account Displays account name if configured, otherwise, displays “Account X” where X is the account number.
BLF Call-pickup
Prefix
Configures the prefix prepended to the BLF extension if the phone answers a call to the monitored
party by the BLF key. Default setting is ** for each account.

Grandstream Networks GXV34 Series Specifications

General

Brand	Grandstream Networks
Model	GXV34 Series
Category	Conference System
Language	English