HTTP/HTTPS Username Enters the user name for the firmware HTTP/HTTPS server.
HTTP/HTTPS Password Enters the password for the firmware HTTP/HTTPS server.
Firmware File Prefix
Checks if firmware file is with matching prefix before downloading it. This field enables
user to store different versions of firmware files in one directory on the firmware server.
Firmware File Postfix
Checks if firmware file is with matching postfix before downloading it. This field enables
user to store different versions of firmware files in one directory on the firmware server.
Upgrade Detection
Update Detect
Click the “Update Detect” button to check whether the firmware in the firmware server
has an updated version, if so, update immediately.
Configure Manually
Download Device Configuration
Downloads the phone’s configuration file in text format. The config file includes all the P
value parameters for phone’s current settings except password for security purpose.
Users can use the Grandstream configuration file generator to generate binary config
file from this text file.
Upload Device Configuration
Uploads configuration file to the phone.
Notes:
•The GXV34x0 supports only txt format for config file upload.
•Reboot is required to take effect.
Configure via Network
Use Grandstream GAPS
It is used to configure the download path and update mode for the configuration file
server.
● If set to “Yes“, the device will set the download path of the configuration file to
“fm.grandstream.com/gs” by default and use HTTPS protocol to connect to the
server.
● If set to “No“, then users can manually configure the path and update mode for the
configuration file server.
Config Update Mode Selects provisioning method: TFTP, HTTP or HTTPS. Default setting is “HTTPS”.
Config Server Path
Sets IP address or domain name of configuration server. The server hosts a copy of the
configuration file to be installed on the phone.
Users can also configure variables in the provisioning server URL; The function allows
users to configure a unified provisioning server URL for different phone models.
Currently, the following variables are supported in the provisioning server URL:
● $PN: it is used to identify the product model name of the IP phone.
● $MAC: it is used to identify the MAC address of the IP phone.
Variables $PN and $MAC can be embedded in server URL setting in Web UI and also in
DHCP Option 66.
● Example (Web UI): /192.168.0.2/$PN/$MAC
● Example (DHCP Option 66): tftp://192.168.0.2/$PN/$MAC
$PN will be replaced with phone model, e.g., GXV34x0. And $MAC will be replaced with
phone’s MAC address, e.g., 000b829a8ffe.
Default settings is “fm.grandstream.com/gs”.
To Next Page
Loading...
Need help?
General
