DTMF Content When key mode is set to Dial DTMF it Configures the dialed DTMF content.
Address
When key mode is set to Multicast Paging, it configures the multiple broadcast
address.
Conference Name When key mode is set to Speed Conference, it sets the speed conference name.
Mute all members
When key mode is set to Speed Conference, enables/disables mute all meeting
members.
Configure
When key mode is set to Speed Conference, it configures Speed Conference members
list:
Number: Enter member’s number.
Name: Enters member’s name.
Account: Specified the account associated.
Operation: + to add a member, – to delete a member.
Programmable Key General
Settings
General Settings
Enable LCD Turn On
Automatically when BLF/SCA
status changes
Configures whether the LCD should turn on automatically when BLF/SCA status
changes.
Proxy Prefix
Account
Displays account name if configured, otherwise, displays “Account X” where X is the
account number.
BLF Call-pick Prefix
Configures the prefix prepended to the BLF extension if the phone answers a call to the
monitored party by the BLF key.
Default setting is ** for each account.
Event List URI
Determines the event list BLF URI on the phone to monitor the extensions in the list
with MPK keys. This feature is based on BroadSoft standard. It requires filling in the BLF
ID to the box.
For example, if the server provides the URI: BLF123@myserver.com, this field should be
filled with BLF123. Then the monitored extensions will be populated in the MPK app or
Extension Board (if supported).
Force BLF Call-pickup by Prefix
Uses the prefix for BLF Call-pickup.
The default setting is “No”.
Table 46: Applications/Programmable Key