P a g e | 39
GXW42xx User Manual
Version 1.0.15.30
Additional functions available to administrators are:
MAINTENANCE: Full settings for network, upgrade/provisioning, TR-069, Security and Syslog.
ADVANCED SETTINGS: To set advanced Ring Tongs, FXO Failover, and System Features.
PROFILE X: To configure each of the SIP accounts.
FXS PORTS: To configure each of the FXS ports and Hunting Groups etc.
Table 7: Status
Contains the product model info.
Program: This is the main software release. This number is always used for firmware
upgrade. Current version is 1.0.5.30.
Bootloader: current version is 1.0.5.1
Core: current version is 1.0.5.11.
Base: current version is 1.0.5.24
CPE: current version is 1.0.1.48
Shows system uptime since the last reboot.
The time according to NTP server.
Shows the status of the VOIP applications.
The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. The MAC address will be used for provisioning and can be found on the
label on original box and on the label located on the bottom panel of the device.
Shows the current IP mode.
Shows IP address of GXW42XX.
Shows Subnet Mask of GXW42XX.
Shows Default Gateway of GXW42XX.
Shows DNS Server of GXW42XX.