Comwave 9-1-1
Take a moment to review the 9-1-1 terms at www.comwave.net/911.
Be sure that your 9-1-1 address is up to date. Log into your
account at www.comwave.net/myaccount to
verify or update your 9-1-1 address.
IMPORTANT: Every time you change your billing address or travel with your Comwave Home Phone Adapter
you will need to update your 9-1-1 address.
Comwave’s Call Waiting service allows you
to answer a second incoming call without
disconnecting your original call.
How it works: To answer the second call and
toggle between two callers, simply press
the “Flash” or “Switch Hook” button on your
telephone set.
Tip: If you subscribe to Call Waiting service and
wish to engage in a phone call without being
interrupted by Call Waiting, you can disable
it for that call by keying *70 , followed by the
number you wish to call.
Comwave’s Caller ID service allows you to see
the identity of the person calling you and they
can see your identity when you call them.
How it works: Your telephone number
and name were set when you signed up to
Comwave and will appear as rst-initial last-
name (example: J. Smith).
Tip: If you wish, you can “hide” your ID (name
and phone number) on a call-by-call basis by
keying *67 before the number being dialed.
Call Waiting
There are many more features available.
For a complete description and setup instructions, visit www.comwave.net/features
Caller ID
To Next Page
Loading...
Need help?
General
