Grandstream Networks HT802 User Manual

FIRMWARE VERSION 1.0.0.5 HT802 USER MANUAL Page 12 of 46
DHCP Server/Client
Yes, DHCP Client only
Telnet Server
Yes
Fax over Ip
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-
through, Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay
QoS
Diffserve, TOS, 802.1 P/Q VLAN tagging
Transport Protocol
RTP/RTCP
DTMF Method
Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or SIP Info
IP Signaling
SIP (RFC 3261)
Provisioning
TFTP, HTTP, HTTPS, TR-069, XML
Control
TLS/SIPS , SIP over TCP/TLS
Device Management
Web interface or via secure encrypted AES or non-encrypted central configuration file for
mass deployment using Grandstream binary file or xml format. Auto/manual provisioning
system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT. Syslog support. Full support of TR-069 management protocol
and Telnet access.
Dial Plan
Yes
Caller ID
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Call Handling
Features
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold,
forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return service
HARDWARE SPECIFICATION
The table below lists the Hardware and Technical specification of HT802.
TABLE 4: HT802 HARDWARE AND TECHNICAL SPECIFICATIONS
Telephone Interfaces
2 RJ11 FXS port
Network Interface
1 RJ45 10/100 Mb Base-TX, Full Duplex port with connectivity LEDs
LED Indicators
POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button
Yes
Universal Switching
Power Adaptor
Input: AC 100–240 V 50/60 Hz 0.2A max
Output: DC 5V, 1A, UL, FCC certified
Environmental
Operational: 32
o
–104
o
F or 0
o
–40
o
C
Storage: 14
o
–140
o
F or -10
o
–60
o
Humidity: 10–90% Non-condensing

Grandstream Networks HT802 Specifications

General

Brand	Grandstream Networks
Model	HT802
Category	Adapter
Language	English