IMPORTANT WEB CONFIGURATIONS
The HT841/HT881 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the
HT841/HT881 through a web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE.
Microsoft Internet Explorer: version 10 or higher.
Google Chrome: version 58.0.3 or higher.
Mozilla Firefox: version 53.0.2 or higher.
Safari: version 5.1.4 or higher.
Opera: version 44.0.2 or higher.
Web UI Access Level Management
There are three default passwords for the login page:
HT841/HT881 Access Level Types
Saving the Configuration Changes
After users make changes to the configuration, pressing Update button will save but not apply the changes until Apply button is clicked. Users can
instead directly press Apply button. When a reboot is required to apply changes, the web page will prompt the user to reboot by offering a reboot
button on the web page.
Changing Admin Level Password
1. Access your HT841/HT881 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: The password found on the sticker on the back of the unit).
3. Press Login to access your settings.
4. Go to System Settings 🡪 Security Settings 🡪 User Info Management and enter the new admin password. ( Must contain 4-30 characters,
Purposely not displayed for security protection.)
model.
Please congure the following parameters for each port:
● CID: Shows the caller ID of the destination where the call will be forwarded.
● Sip Server: Displays the SIP Server
● Sip Destination Port: Displays the destination port
User Level Password Web Pages Allowed
Administrator
Level
admin password is found on
a sticker on the back of the
unit
All pages.
End User Level 123 Only Status and Basic Settings
Viewer Level viewer Only checking. Not allowed to modify content.
Note
The password is case sensitive with maximum length of 30 characters. When changing any settings, always submit them by pressing Update or Apply
button on the bottom of the page. After submitting the changes in all the Web GUI pages, if a reboot is required, the web page will prompt the user to
reboot by offering a reboot button on the web page.
To Next Page
Loading...
