Grandstream Networks UCM6308A Quick Installation Guide

~3~
~4~
CONNECTING THE UCM6304/6308/6308A:
1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the
UCM6304/6308/6308A.
2. Connect the other end of the Ethernet cable into the uplink port of an Ethernet
switch/hub.
3. Connect the 12V DC power adapter into the DC 12V power jack 1 on the back
of the UCM6304/6308/6308A. Insert the main plug of the power adapter into a
surge-protected power outlet. (Connect the second power adapter into the DC
12V power jack 2 for failover purpose in case the rst one is down).
4. Wait for the UCM6304/6308/6308A to boot up. The front LCD display will show
the UCM’s hardware information when the boot process is completed.
5. Once the UCM6304/6308/6308A is successfully connected to the network via
WAN port, the Network LED indicator will be lit green, and an IP address will
be shown on the LCD display.
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports, connect
analog devices (phone and fax) to the FXS ports.
DC 12V (x2)
WAN port
LAN port
Reset
Heartbeat port
FXS ports
FXO ports
Ground
SD Card slot
USB ports
1. Press “OK” key to start browsing menu options.
2. Press “Down” to browser di󰀨erent menu options. Press “OK” to select an entry.
3. In the menu option, select “Back” to go back to previous menu.
4. The LCD will return to default display after being idle in menu for longer than
30 seconds.
CONFIGURING THE UCM6304/6308/6308A
VIA WEB GUI:
1. Connect the computer to the same network as the UCM6304/6308/6308A.
2. Ensure the UCM6304/6308/6308A is properly powered on then press the
“Home“ button to displays the IP address and other information on the LCD
screen.
3. Open a web browser on the computer and enter the displayed IP address into
the search bar in the following format: http(s)://ipaddress:portnumber
4. Enter admin’s username and password to access the conguration menu.
(The factory default username is “admin” while the default random password
can be found on the sticker at the back of the unit).
Note: The number of FXS/FXO ports depends on UCM6304/6308/6308A model.
5. For more detailed information on how to congure SIP extensions, PSTN con-
nections, SIP trunks, and other system settings via the web UI, please down-
load the UCM6304/6308/6308A user manual here: http://www.grandstream.
com/support/
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign patent counter-
parts thereto) identied at www.cmspatents.com.
UCM6304 Front view
UCM6304 Rear view
LED indicators
LCD
Navigation keys
USING THE UCM6304/6308/6308A LCD MENU:
DC 12V (x2)
WAN port
LAN port
Reset
Heartbeat port
FXS ports
FXO ports
Ground
SD Card slot
USB ports
UCM6308/6308A Front view
UCM6308/6308A Rear view
LED indicators
LCD
Navigation keys

Grandstream Networks UCM6308A Specifications

General

Brand	Grandstream Networks
Model	UCM6308A
Category	PBX
Language	English