P a g e | 10
• For proper audio/video exchange, create an RTP port range mapping on your router. From the
figure above, this would be 10000-20000.
• For proper presentation sharing, create a port range mapping on your router. From the figure
above, this would be 53000-55999.
Step 3 (for Wave): Configure the STUN and TURN server settings as highlighted in the figure below.
Without UCM RemoteConnect, users would need to confirm their own STUN/TURN server information.
Figure 5: SIP Settings - STUN/TURN Server
Table 2: RTP Settings
To Next Page
Loading...
